CFD Facebook
CFD Twitter
Home
Team
Services
Resources
Downloads
Publications
Testimonials
News & Events
News
Events
Faculty Partners
Advisory Board
Contact Us
Login
You are here
Home
» Download Codes
Download Codes
Title of the research migration
Please select...
2D Computational Analysis of Fluid Flow and Heat Transfer in Rectangular Channels with Hierarchical Rib Turbulator Designs (Proposed by Mr Maulin Vipul Mehta)
Aerodynamic analysis of Ahmed Body (Proposed by Mr Atharv Toraskar)
Buoyancy-Driven Thermal Plume Characteristics Using OpenFOAM (Proposed by Mr Udit S Rao)
CFD analysis of fluid flow and heat transfer in a shell and tube heat exchange in OpenFOAM (Proposed by Mr Aabhushan Regmi)
CFD analysis of human powered submarine (Proposed by Mr Dibyajyoti Chakraborty)
CFD Analysis of Natural Convection Flow through Vertical Tube (Proposed by Mr Bor Abubakralsedig Bor Hessian)
CFD analysis on Flow over cylinder and impact of no of sides and orientation of cylinder on the drag in a Laminar flow (Proposed by Mr Ridham Jignesh Shah)
CFD modeling of single-phase flow in a stirred tank reactor (Proposed by Mr Biraj Khadka)
CFD Workbench Evaluation and Testing using OpenFOAM FreeCAD (Proposed by Ms Tithi Biswas)
Classy Blocks Integration for Blender: A Structured Mesh Generation GUI for OpenFOAM (Proposed by Mr B C H Benjamin)
Comparative Analysis of Wave Models and Motion Dynamics of a Freely Floating Barge (Proposed by Mr Samim Khadka)
Comparison of Viscosity Models for the Simulation of Non-Newtonian Flow in Lid-Driven Cavity (Proposed by Mr Shreyas Shrestha)
Development of a Graphical Interface for SnappyHexMesh Dictionary Generation in OpenFOAM (Proposed by Mr Kumar Ashmit Ranjan)
DEVELOPMENT OF NODE-BASED OPENFOAM CASE GENERATOR IN PYQT FOR OPENFOAM GUI (Proposed by Ms Navya Sai Sadu)
Development of Parser for PyVnt and Visual Representation of PyVnt Node in Blender (Proposed by Mr Yash Suthar)
Development of Tree-node Management API for OpenFOAM GUI (Proposed by Mr Nitin Yadav)
Development of Tree-node Management API for OpenFOAM GUI (Proposed by Mr Diptangshu Dey)
Development of Tree-node Management API for OpenFOAM GUI (Proposed by Mr Diptangshu Dey)
Dynamic Turbulence Model Configuration in CfdOF (Proposed by Ms Anugya Chaubey)
Effect of amplitude of walls on thermal and hydrodynamic characteristics of laminar flow through an asymmetric wavy channel (Proposed by Mr Abhishek Raghuvanshi)
Effect of Nanofluid Sedimentation in Natural Convection Heat Transfer (Proposed by Mr Mcwin Aadil Roy)
Enhancing the OpenFOAM GUI: Migration and Improvements for Blender 4.2 Compatibility (Proposed by Mr Budhil Nigam)
Flow And Turbulent Structures Around Simplified Car Model Using OpenFOAM (Proposed by Mr Aditya Anand Kulkarni)
Flow Around a Cylinder: A Comparative Study of Immersed Boundary and Arbitrary Lagrangian–Eulerian (ALE) Methods in OpenFOAM (Proposed by Mr Antim Gupta)
Flow Around a Plunging Airfoil: A Study Using the New Immersed Boundary Method Algorithm in foam-extend 4.1 (Proposed by Mr Sugam Lamsal)
Forced convection past a semi-circular cylinder at incidence with a downstream circular cylinder (Proposed by Mr Saptarshi Joshi)
HEAT TRANSFER IN A FLUIDISED BED (Proposed by Mr Nikhil Chitnavis)
Heat Transfer in a Trapezoidal Micro-channel with Laminar Fluid Flow (Proposed by Mr Shantanu Shukla)
High-speed compressible flow over blunt and re-entry bodies (Proposed by Mr Ishar Singh Saini)
Implementing Polylines for the OpenFOAM GUI Project (Proposed by Mr Swapnil Ranadive)
Implementing Splines and Usage Tutorial System for OpenFOAM GUI (Proposed by Mr Patel Aarsh Miteshkumar)
Incompressible Flow Over NACA 0012 Airfoil Profile (Proposed by Mr Mohamed Fadol Orsod Ornasir)
Investigating the effect of wall-mounted V-baffle position in a turbulent flow through a channel (Proposed by Mr Sateesh Kumar Boda)
KCS Bare Hull Resistance (Proposed by Dr Joseph Prabhu)
Laminar Flow Vortex Shedding Around the Cylinder (Proposed by Mr Alsheikh Abdalmjeed Alsheikh Ali)
Low Reynolds Number Flow Over a Square Cylinder with a Detached Flat Plate (Proposed by Mr Sachin S B)
Low Reynolds Number Flow Over Non-Rectangular Bluff Bodies (Proposed by Mr Evan Fernandes)
Modelling and Simulation of Fuel Injection during Motoring of Internal Combustion Engine (Proposed by Mr Bikash Kumar Jaiswal)
Natural Convection in a Vertical Channel with fins using conjugate heat transfer solver in OpenFOAM (Proposed by Mr Chitikena Chaitanya Kishore)
Numerical Analysis of Air Film Cooling Effectiveness at High Temperature and Pressure (Proposed by Mr Veasna Mom)
Numerical and experimental study of Jet Chamber designs for enhancing convective heat transfer in mini-tube heat exchangers (Proposed by Mr Venkata Mani Sai Nandan Vanapalli)
Numerical investigation of mixing in serpentine microchannels (Proposed by Mr Nishit Pachpande)
Numerical Modeling of Rayleigh Taylor Instability in Confined Geometries (Proposed by Mr Apoorv Giriya)
NUMERICAL MODELLING OF FLOW WITHIN POROUS MEDIA USING OpenFOAM® (Proposed by Ms Mena G Pillai)
Numerical Simulation of a Fixed-Wing UAV and the Effect of Blended Winglets (Proposed by Mr Toran Bahadur Niroula)
Numerical Simulation of a Food Sterilization Process involving Natural Convection Heating (Proposed by Mr V Sai Yeshwanth)
Numerical simulation of breakup of a viscous drop in simple shear flow through a volume-of-fluid method (Proposed by Ms Shreya Makkar)
NUMERICAL SIMULATION OF STIRRED TANK REACTOR (Proposed by Mr Maharghya Dyuti Das)
Numerical Simulations of Fluid Flow in Pipe Presenting Effect of Fluid Viscosity and Flow Coefficient (Cv) calculations (Proposed by Mr Ketan Prafull Kulkarni)
Numerical study of single air bubble formation in viscous liquid (Proposed by Mr Debdip Biswas)
OpenFOAM Case Generation and Traversal using LLMs (Proposed by Mr Suyash Mishra)
OpenFOAM Case Genration and Traversal using LLM (Proposed by Mr Vedant Dubey)
openFoam simulation of Turbulent Flow Through T_Junction (Proposed by Mr Prathamesh Joshi)
Plaque Concentration Modelling and Hemo-Acoustic Study in Axisymmetric Stenosed Coronary Artery (Proposed by Mr Sumant)
Prediction of Turbulence in Separated Flow using Asymmetric Diffuser Geometry (Proposed by Mr Divyesh Variya)
Response dynamics of floating body subjected to waves (Proposed by Mr Akshay Suresh Shimpi)
SIMULATION OF NARROW CHANNELS WITH CORRUGATED WALLS (Proposed by Mr Mohammed Danish)
Simulation of the Effective Thermal Conductivity Calculation of BCC Lattice Structure (Proposed by Mr Abhishek Dey)
Steady state CFD method for residence time distribution in different tubular geometries to evaluate the mixing (Proposed by Mr Dhore Atharva Vilas)
Streamlining Open-Source CFD: A Comparative Study of GUI-based vs. Script-based OpenFOAM Workflows (Proposed by Mr Medehal Pavan Sai Tarun)
Study of fluid flow in porous metal foams using OpenFOAM (Proposed by Mr Ketan Yogi)
Study of laminar flow and heat transfer in a square channel with 30 degree inline angled baffle turbulators using OpenFOAM (Proposed by Mr Suraj)
STUDY OF PRESSURE DROP IN MICROCHANNEL VARYING TEMPERATURE WITH CONSTANT BIFURCATION OF 90 DEGREE. (Proposed by Ms Mahima Bunker)
Study of Rise of Multiple Bubbles in Quiescent Liquid using OpenFOAM Software (Proposed by Mr Hyzam Kaliyadan)
Unstructured CF Mesh: An Integrated Blender Add-on for OpenFOAM & cfMesh Workflows (Proposed by Mr Pranjal Kumar Shukla)
Validating non-isothermal mechanical ventilation in a generic closure using OpenFOAM (Proposed by Mr Agathiyan V)
About the research migration
Proposer Name:
Mr Udit S Rao
Title of the research migration:
Buoyancy-Driven Thermal Plume Characteristics Using OpenFOAM
University:
Vellore Institute of Technology
Download Synopsis
Download research migration
