CFD Facebook
CFD Twitter
Home
Team
Services
Resources
Downloads
Publications
Testimonials
News & Events
News
Events
Faculty Partners
Advisory Board
Contact Us
Login
You are here
Home
» Download Codes
Download Codes
Title of the case study
Please select...
2D Battery Cooling using Natural and Forced Convection (Proposed by Mr Jose Paul B)
2D Simulation of H-Darrieus type vertical axis wind turbine using transition turbulence model in OpenFOAM (Proposed by Mr K Sri Sai Satya Sasank)
2D turbulent buoyant flow (Proposed by Mr A. Sibo Anthony)
3D modelling of Porcupine River Training Works (Proposed by Mr Riddick Kakati)
3D Numerical Investigation of Bio-Inspired Vertical Axis Wind Turbine Rotor using Arbitrary Mesh Interface (AMI) (Proposed by Mr Manu Aryal)
3D Numerical Investigation of Savonius Vertical Axis Wind Turbine using Fluid-Driven 6DoF Motion Solver (Proposed by Mr Prakash Poudel)
3D Simulation of Flow Inside a Counter Flow Vortex Tube (Proposed by Mr Prajit Dhakal)
A CFD study on 2D SCRAM jet Intake using OpenFOAM (Proposed by Mr Sahil Deepak Kukian)
A Comparison Study of Drag correlations for a Dispersed Multiphase flow in a Fluidized bed (Proposed by Mr M Siva Karthikeya)
A study of Stenosis and Aneurysm (Proposed by Mr Mithun M Nair)
Aerodynamic characteristics of Subsonic missile (Proposed by Mr Dhileeban N)
Aerodynamic study of Formula-1 car (Proposed by Mr Variya Divyesh Dilipbhai)
Aerodynamics of Bristled Wings (Proposed by Mr Yukesh Karki)
Aerodynamics of Tesla cyber truck (Proposed by Mr Arpit Arvind Jain)
Air flow analysis in an empty room using OpenFOAM (Proposed by Mr Jishnu Handique)
Air flow simulation around a bullet using OpenFOAM (Proposed by Mr Akash Padmane)
Air Residence Time analysis for Nuclear lab in IITB with and without AC (Proposed by Mr Velamakuri Prasad)
Air-flow in bed-room with rotating fan explaining cyclic AMI in OpenFoam (Proposed by Mr Variya Divyesh Dilipbhai)
Analysis of active control of vortices generated by a bluff body in a flow using rotating cylinders (Proposed by Mr Maitreya Sinha)
Analysis of body(sphere) falling in liquid(water) (Proposed by Mr Raj Niraj Patil)
Analysis of fixed OWC under various Wave Conditions (Proposed by Ms Janhavi Deshpande)
Analysis of flow behavior when obstructed by moving vane (Proposed by Mr Vignesh.s.p)
Analysis of flow through an orifice plate of different shapes using OpenFoam (Proposed by Mr Saarth Shukla)
Analysis of free-falling wedge onto water using OpenFOAM (Proposed by Mr Vignesh.S.P)
Analysis of ventilation in a classroom with machine learning (Proposed by Mr Shiva Sudhan R)
Analysis of ventilation strategies for improved air quality in a classroom with CFD-driven Machine Learning (Proposed by Mr Saukhya Sunil Telge)
Annulus water jacket cooling of an induction motor (Proposed by Mr M Devesh)
Atmosphere in a differentially heated rotating annulus: Baroclinic waves (Proposed by Mr Shivam Swarnakar)
Ballistic Coefficient of a .338 caliber Lapua Magnum VLD Projectile (Proposed by Mr Jay Baviskar)
Bleeding technique to control flow separation in hypersonic intakes (Proposed by Mr Sandesh Kunwar)
Calculation of Reaction-Based Residence Time under Different Operating Conditions and Its Comparison with Flow-Based Residence (Proposed by Mr Dhananjoy Banik Joy)
CFD 2D analysis on air jet impingement using chtMultiRegionFoam in OpenFOAM (Proposed by Mr Jeetkumar Pravinbhai Patel)
CFD analysis of a bullet train (Proposed by Mr Variya Divyesh Dilipbhai)
CFD Analysis of a Planetary Gearbox (Proposed by Mr Parth Tawarawala)
CFD analysis of an airfoil NACA 4410 and estimating its coefficient of lift and drag (Proposed by Mr Antim Gupta)
CFD analysis of Fins (Proposed by Mr Dibyajyoti Chakraborty)
CFD analysis of Flow around a Golf Ball (Proposed by Mr Rohan Gulve)
CFD analysis of flow past staggered tube array using 2D RANS turbulence models (Proposed by Mr Nikhil Sharma)
CFD analysis of fluid flow and heat transfer in a shell and tube heat exchanger in OpenFOAM (Proposed by Dr Raj Kumar Saini)
CFD Analysis of Free-Falling Disks Using Overset Mesh Techniques (Proposed by Ms Duruseti Srija)
CFD analysis of Jet driven multiphase flow (Proposed by Mr Azim Memon)
CFD Analysis of Shear-Thinning Fluid Flow in a Converging–Diverging Channel (Proposed by Mr Samuel Sagar Ambati)
CFD simulation and experimental validation of flow through a mouthpiece (Proposed by Mr Rajat Walia)
CFD simulation of flow through pipe to validate Entrance length and fully developed Flow in laminar & turbulent flow (Proposed by Mr Manoj Paithane)
CFD Simulation of flow through pipe: A comparative study on cyclic and inlet-outlet type boundary conditions in OpenFOAM (Proposed by Mr Nikhil Sharma)
CFD Simulation of Hydraulic Jump (Proposed by Mr Karri Vijay Reddy)
CFD Simulation of Tesla Valve (Proposed by Mr Vignesh.s.p)
CFD Simulation of Thermal Management System (Immersion Cooling) of Lithium Ion Batteries in Electric Vehicles (Proposed by Mr Manthan Dhisale)
CFD study of deLaval nozzle with Fanno and Rayleigh condition (Proposed by Mr Shouvik Ghorui)
CFD study of ventilation in a room maintained under negative-pressure to prevent airborne contamination (Proposed by Mr Shouvik Ghorui)
Coanda Effect: variation with curvature radius for laminar fluid jets (Proposed by Mr Nikhil Sharma)
Comparison of Fin Design for Convective Cooling of Heat Sinks (Proposed by Mr J Harikrishnan)
Comparison of power takeoff between Fixed OWC and Backward Bent Duct Buoy OWC (Proposed by Mr Anuprash Mishra)
COMPUTATION OF AN AXISYMMETRIC JET USING OPENFOAM (Proposed by Mr Kunal Kailash Sharma)
Control and flow reactions of Microfluidic Network (Proposed by Mr Mohit Kumar Saw)
Cooling of sphere - natural and forced convection (Proposed by Mr Vignesh.s.p)
Detached Bow Shock Formation in a Supersonic Flow over a Wedge (Proposed by Mr Ashley Melvin)
Development of an Overset Mesh Framework for a Single-Orifice Rotary Slinger Atomizer Using OpenFOAM (Proposed by Mr Manikandan Padmanaban)
diesel surrogate combustion (Proposed by Mr Khubaib)
Different discretization schemes in OpenFOAM (Proposed by Mr Variya Divyesh Dilipbhai)
Domain decomposed Agentic RAG-based pipeline for OPENFOAM case synthesis (Proposed by Mr Gokulpriyadharsan M)
DSMC simulations of Mach 10 hypersonic rarefied flow over a 2D cylinder (Proposed by Mr Mrinal Mahato)
Dust particles tracking inside a model room (Proposed by Mr Jishnu Handique)
Dynamics of Porous Cylinders (Proposed by Mr Jonathan Thomas John)
Dynamics of solids connected by liquid bridges with contact angle hysteresis (Proposed by Mr Rajnish Kaushal)
Effect of Air Conditioner on the Ventilation of Nuclear Lab, IIT Bombay (Proposed by Mr Polipalli Madhusudhanarao)
Effect of Boundary Conditions and turbulence model on wake of a 3D underwater obstacle (Proposed by Mr Aditya Paspunurwar)
Effect of Convexity on onset of Rayleigh-Bénard Convection in Convex and Concave Cylinders (Proposed by Mr Govind Maurya)
Effect of slotted hole on film cooling using OpenFOAM (Proposed by Mr Jishnu Handique)
Effect of transverse magnetic field on the conducting fluid flow through pipe with constriction (Proposed by Ms Padmini Priyadarshini)
Evaluation of Parametric Effects of Microstructural Riblets on the Boundary Layer Flow over Flat Plate (Proposed by Mr Ashutosh Kumar)
Experimental and numerical investigation on the effects of jet Reynolds number and nozzle-plate spacings on single round air jet (Proposed by Mr Gikku Tom)
Exploring Overset Meshes for Moving Body Problems Using OpenFOAM (Proposed by Mr Bhadri Srivatshan K R)
External incompressible flow over hull of ship (Proposed by Mr Siddhant Saraswat)
Falling of water droplet on the pool of water (Proposed by Mr Variya Divyesh Dilipbhai)
Film cooling on a flat plate by air-water mist injection (Proposed by Mr Jishnu Handique)
Flow Around a Plunging Airfoil: A Comparative Study of Immersed Boundary and Arbitrary Lagrangian-Eulerian (ALE) Methods. (Proposed by Mr Manjil Sitoula)
Flow over consecutive heated cylinders for a dynamic fruit cooling system (Proposed by Ms Khyati Jain)
Flow Over Heated Flat Plate Having Unheated Starting & End Length (Proposed by Mr Shubhanshu Rai)
Flow over inclined plate (Proposed by Mr Rohin K Rajeev)
Flow past an Elliptic Cylinder (Proposed by Mr Arham Javed)
Flow past nine cylinders in square configuration (Proposed by Mr Om Mihani)
Flow Physics of a Porous Cylinder (Proposed by Mr Prabin Paudel)
Flow Prediction around a NACA0012 Airfoil at low Reynolds Number (Proposed by Mr Subham Kant Das)
Flow through a Convergent-Divergent Nozzle (Proposed by Mr Ashley Melvin)
Flow Through Offset Fin(Characterisation of Offset Fin in Term of Friction Factor) (Proposed by Mr Dharmveer Hingonia)
Flow visualization on v-gutter and teethed v-gutter flame holders (Proposed by Mr Bhaskar S)
Fluid jet impinged into another fluid matrix (Proposed by Ms Kriti Chaturvedi)
Fluid Solid Interaction (FSI) using solids4Foam (Proposed by Mr Lucky Babu Jayswal)
Fluid-Structure Interaction Benchmarking using Solids4Foam (Proposed by Mr Manish Tajpuriya)
Fluid-Structure Interaction of Moving Flexible Bodies Using Overset Meshing, solids4Foam, and preCICE (Proposed by Mr Krishna Prasad Sah Sudi)
Forced Convection Heat Transfer Over A Heated Cylinder In OpenFOAM (Proposed by Mr Kartik)
Forced Convection through Helical Pipe with Constant Wall Temperature (Proposed by Mr Varun Pathak)
FSI of Rotating Porous Square Cylinder Using Continuous Forcing Immersed Boundary Method (Proposed by Mr Prajwol Bohara)
Generation of 2D Computational Domains using SnappyHexMesh in OpenFOAM (Proposed by Ms Shravani Abhijeet Kulkarni)
Gravity Driven Flow (Proposed by Mr Subham Kumar Das)
Gust Response Of a Porous Wing (Proposed by Mr Saadullah Syed)
Heat transfer analysis in I section beam (Proposed by Mr Aakash Rana)
Heat Transfer Enhancement In Fluids Using UltraSonic Waves (Proposed by Mr Hrushikesh Mohite)
Hydraulic Jump (Proposed by Mr Raj Niraj Patil)
Hydrodynamics study of a bubbling fluidized bed (Proposed by Mr Jishnu Handique)
Ignition Delay Time and Flame Speed Validation of TPRF-E Mechanism Using OpenFoam (Proposed by Mr Muhammad Sameel Kalathil Thody)
Impact of Air Conditioning on Airflow in the Nuclear Laboratory at IIT Bombay (Proposed by Mr Rohan Sheth)
Implementation of custom drag model in a bubble column reactor (Proposed by Mr Arunkl)
Implementing custom boundary conditions using ‘codedFixedValue’ boundary condition in OpenFOAM (Proposed by Mr Mohamed Adnan Kulam Najmudeen)
Implementing streamwise periodic boundary condition in OpenFOAM (Proposed by Mr Harikrishnan S)
Improving air quality in classrooms using ART and using ML to expedite simulation results (Proposed by Mr Kushal Agarwal)
Influence of Aspect Ratio and Thickness on Dynamic Stall of a Finite Wing (Proposed by Mr Malhar Dineshkumar Prajapati)
Inspiratory Steady Flow Analysis in Symmetrically Bifurcating Lung Airways (Proposed by Mr Nikhil Kumar Tamboli)
Investigating the effect of stenosis severity on wall shear stress of an artery with pulsatile flow in OpenFOAM (Proposed by Mr Sateesh Kumar Boda)
Isothermal incompressible fluid flow through a T-Junction (Proposed by Mr Vipinkumar C P)
Laminar Flow across an Oscillating Cylinder (Proposed by Mr Ashley Melvin)
Laminar flow through fuel cell stacks (Proposed by Mr Anas Ahmed Elamin Ahmed)
LARGE EDDY SIMULATION CONFINED CIRCULAR JET OPENING IN TO A RECTANGULAR CHANNEL (Proposed by Mr G Dinesh Kumar Reddy)
Large Eddy Simulation of a confined planar jet opening in a rectangular channel (Proposed by Mr Binayak Lohani)
LES Simulations of turbulent flow in a branched channel (Proposed by Ms Rozy Kumari)
LES Simulations of turbulent flow in a trough and detailed comparison with DNS simulations (Proposed by Mr Subhrajit Majumder)
Lift and drag force analysis on cambered airfoil for different chord length (Proposed by Mr Ganesh Kumar K)
Mach Reflection: Flow over a Forward facing Step (Proposed by Mr Ashley Melvin)
Magneto-Hemodynamic Flow in a Two-Sided Lid-Driven Cavity (Proposed by Ms Padmini Priyadarshini)
Magnus Effect: Rotating Cylinder in a Turbulent Flow (Proposed by Mr Ashley Melvin)
Matrix Cooling for Gas Turbine Blades (Proposed by Mr Jinu Chandran)
Model vertical axis wind turbine with dynamic mesh (Proposed by Mr Jishnu Handique)
Modelling Flow in a Fluidized bed (Proposed by Mr Aryan Gupta)
Multiphase flow simulation over INS Vikramaditya (Proposed by Mr Variya Divyesh Dilipbhai)
Multiphase simulation using OpenFOAM for calculating ship hull resistance (Proposed by Mr Rishabh Sharma)
Natural Convection in an Enclosure Heated From Bottom (Proposed by Mr Shubhanshu Rai)
Natural convection study of air between heated walls (Proposed by Mr Jishnu Handique)
Non Newtonian Fow past 2D Cylinder (Proposed by Ms Subbulakshmi)
Numerical Analysis of Flow Past a Blunt Heated Cylinder using OpenFOAM (Proposed by Mr Mohammed Saqlain)
Numerical Analysis of Phase Change Material with Variable Heat Load using OpenFOAM (Proposed by Mr Syed Aaqib Ahmed A)
Numerical investigation of fluid flow around NACA0012 airfoil using OpenFOAM (Proposed by Mr Subham Kant Das)
Numerical Investigation of Indoor Airflow using a Precursor Inlet Strategy (Proposed by Mr Gokulpriyadharsan M)
Numerical Investigation Of Mixed Convective Heat Transfer Enhancement Using Rectangular Fins Using OpenFOAM (Proposed by Mr Likhit Kammara)
Numerical Simulation Melting of Ice using OpenFOAM (Proposed by Mr Vignesh.s.p)
Numerical Simulation of an Undulatory NACA0012 Hydrofoil using Overset Mesh (Proposed by Mr Keshav Poudel)
NUMERICAL SIMULATION OF FLOW AROUND AND OVER SIX IN-LINE SQUARE CYLINDERS (Proposed by Ms Monalisha)
Numerical simulation of flow through 2-D channel with constriction using OpenFOAM (Proposed by Mr Syed Aaqib Ahmed A)
Numerical simulation of laminar and turbulent flow through a circular pipe (Proposed by Ms Monalisha)
Numerical simulation of methane jet using OpenFOAM (Proposed by Mr Aditya Tr)
Numerical Simulation of Non-Newtonian Fluid Flow across a Sinusoidal Microchannel (Proposed by Mr Pranay Kumar Pandey)
Numerical Simulation of Vortex Shedding Suppression From a Circular Cylinder Using Rigid Splitter Plates (Proposed by Mr Vinoth Kumar D)
Numerical simulation of water bottle filling in openFOAM (Proposed by Mr Nandha Kumar. R)
Numerical study of an airfoil interacting with the vortical wake of an upstream cylinder (Proposed by Mr Raj Solanki)
Numerical study of flow of electrically conducting fluid over an airfoil (Proposed by Mr Rahul Radhakrishnan)
Numerical Study of Flow Through a Sudden Expansion using OpenFOAM (Proposed by Ms Supraja Pandurang Shinde)
Numerical study on the heat transfer characteristics of oscillating flow in Cryogenic regenerators (Proposed by Mr Swadesh Rath)
Optimizing hole distribution in a showerhead of a semiconductor reactor (Proposed by Ms Supraja Pandurang Shinde)
Parametric Study on the Effect of Baffles on Fuel Tank Sloshing (Proposed by Mr Swapnil Popatrao Shinde)
Passive Propulsion in Vortex Wakes (Proposed by Mr Gade Chandramouli)
Performance Analysis of a Novel Surveillance UAV using OpenFOAM (Proposed by Mr Sahil Deepak Kukian)
Performance analysis of photovoltaic-thermal liquid collector by CFD simulation (Proposed by Mr Harsh Manani)
Performance Evaluation of Hypersonic Intake for Scramjet Engine (Proposed by Mr Sunil Kumar S)
Physics Informed Neural Networks for CFD Validation using DeepXDE. (Proposed by Mr Sai Krishna Kommineni)
PINN Approximation of 2D Flow Past a Square Cylinder (Proposed by Mr Yash Bagwe)
Plasma Skimming through branched microchannel using OpenFOAM (Proposed by Mr Sahil Deepak Kukian)
Pollutant Dispersion Modelling using CFD: A walkthrough of solver development in OpenFOAM (Proposed by Mr Binayak Lohani)
Prediction of pressure, velocity distributions and visualization of flow patterns around NACA -2415 Airfoil for various angles of attack (Proposed by Mr Vipinkumar C P)
Preparing for Combustion in an IC Engine using Hydrogen (Proposed by Mr Kuralamuthan Veerapandiyan)
Pressure Driven Flow through a Nozzle connected to a Reservoir (Proposed by Mr Ashley Melvin)
Rayleigh-Benard Convection (Proposed by Mr Ashley Melvin)
Rayleigh-Taylor Instability (Proposed by Mr Raj Niraj Patil)
Reduction of Pressure Fluctuation on Hydrofoil NACA 0015 Using Cavitation- Bubble Generator (Proposed by Ms Monalisha .)
Rising Bubble with Mass Transfer using interFoam (Proposed by Mr Mano Prithvi Raj)
Running OpenFOAM on Android (Proposed by Mr Komal Kedarnath G)
Simulating Jet Propulsion Through a Flexible Nozzle Using solids4foam (Proposed by Mr Abikrishnaa Parimelalagan)
Simulating multiphase flow over cylinder and simple boat using OpenFOAM (Proposed by Mr Siddhant Saraswat)
Simulation of 3-D Disinfectant Spray to Study Optimal Spray Cone Angle and Discharge Rate (Proposed by Ms Monalisha .)
Simulation of Fighter Aircraft in sonicFoam (Proposed by Mr Bhaskar S)
Simulation of Flow over Fin and Heat Transfer through Fin in Forced Convection by Cyclic Boundary Condition (Proposed by Mr Onkar Balasaheb Patil)
Simulation of Flow Through A Y-splitter (Proposed by Mr Chaitanya Apte)
Simulation of gas-liquid bubble column contactor using OpenFOAM (Proposed by Mr Kurucheti Rishabh Kumar)
Simulation of Hydrocyclone with solid particles (Proposed by Ms Praharshitha Aryasomayajula)
Simulation of incompressible magneto-hydrodynamic flows (MHD) using mhdFoam solver (Proposed by Mr Anant Talasikar)
Simulation of shocktube problem using pisoCentralFoam (Proposed by Mr Sathish Kumar Kanniappan)
Simulation of supersonic flow over wedge using pisoCentralFoam (Proposed by Mr Sathish Kumar Kanniappan)
Simulation of transition between regular and mach reflection of a poly-tropic gas in a dual-solution domain (Proposed by Mr Rohan)
Simulation of water droplet impact on hydrophilic and hydrophobic surfaces (Proposed by Mr Vignesh.s.p)
Study for Constant and Time Varying Transient flow Analysis of Forward and BackwardFlow through Tesla Valve in 2D using Ramping and Pulsating Inlet Flow(OpenFoam v9) (Proposed by Mr Joydipto Bose)
Study of airflow and impact of Exhaust, window AC and split AC on air ventilation in MFHT Room at IIT Bombay (Proposed by Mr Akhilesh Ravikiran Ponkshe)
Study of boundary layer separation over NACA 662-015 symmetric and cambered airfoil through numerical method (Proposed by Mr Mukund S)
Study of cavitation over hydrofoil using RANS models (Proposed by Mr Barani Ilango)
Study of coanda effect in turbulent jets (Proposed by Mr Binayak Lohani)
Study of Convective Heat Transfer over Series of Tubes by Cyclic and Symmetric Boundary Condition (Proposed by Mr Onkar Balasaheb Patil)
Study of flow around a re-entry space capsule and a parachute using Openfoam (Proposed by Mr Vishish Behera)
Study of Flow Pattern and Lift and Drag on a cylinder with two inlets at diametrically opposite points with parabolic velocity profile at inlet (Proposed by Mr Shouvik Ghorui)
Study Of Flow Pattern and Vortices in a backward-stepped flow with two inlets (Proposed by Mr Shouvik Ghorui)
Study of Forced Convection over Heated 2D Cylindrical Body (Proposed by Mr Yeshas Sudharshan)
Study of MultiForm Single Chamber Oscillating Water Column in OpenFOAM (Proposed by Mr Bindusara Reddy)
Study of Taylor Couette Flow (Proposed by Mr Jose Paul B)
Supersonic Flow over a Diamond Airfoil (Proposed by Mr Eshant Shinde)
Supersonic flow over a Double-Wedge Airfoil (Proposed by Mr Mridu Sai Charan A S)
Supersonic Flow over Multiple Wedges (Shock-on-shock Interaction) (Proposed by Mr Sahil Deepak Kukian)
The Effect of Flexible Flaps on the flow dynamics of a Stalled Airfoil (Proposed by Mr Sambhav Sahani)
Thermal Simulation of Electric Vehicle Battery (Proposed by Mr Shaurya Sarna)
To Design a CFD Model optimizing a Co- Designed Microfluidic Chip with Manifold Micro Channels (Proposed by Mr Bablu Singh)
To observe the effect of hydrodynamic flow and mixing during heating and cooling on heat transfer coefficient in a Straight Tube (Proposed by Mr Harish Jayaraj P)
TO SIMULATE MOTORING OF A DIESEL IC ENGINE IN A SINGLE SIMULATION (Proposed by Mr Shakti Prasad Patra)
Transitional Modelling of flow over flat plate (Proposed by Mr Sumedh Shreeram Soman)
Transitional Modelling of flow over sphere (Proposed by Mr Sumedh Shreeram Soman)
Turbulent Flow in a Diffuser (Proposed by Mr Nikhil Sharma)
TURBULENT FLOW OVER BACKWARD FACING STEP (Proposed by Mr Kamal S Kumar)
Validation of laminar pipe flow (Proposed by Dr Raj Kumar Saini)
Validation of Stoke's Law (Proposed by Mr Raj Niraj Patil)
Ventilation Analysis of Nuclear Lab, IIT Bombay (Proposed by Mr Soham Sachin Purohit)
Ventilation and Airflow Analysis in MFHT Room at IIT Bombay:Impact of Exhaust and AC,Comparison with Dual Exhaust Configuration (Proposed by Mr Deepanjan Das)
Ventilation With Exhaust at Back Wall and Intervention of AC at Right Wall and Front Wall (Proposed by Ms Sayalee Vaibbhav Kushire)
Verification and Validation of aerospike designs in supersonic flow (Proposed by Mr Ishar Singh Saini)
Visualization of the bubble and its growth, along with mixing phenomenon in multi-jet fluidized bed. (Proposed by Mr Shivam Swarnakar)
VISUALIZING TRANSIENT FLOW OVER A RIGHT CIRCULAR CYLINDER (Proposed by Mr Kamal S Kumar)
Voltage Response of a Li-ion Battery Cell using OpenFOAM (Proposed by Mr Arham Javed)
Water flow simulation in an elbow draft tube (Proposed by Mr Arpit Arvind Jain)
Wind analysis around tall buildings (Proposed by Mr Ratish Dixit)
About the case study
Proposer Name:
Mr Likhit Kammara
Title of the Case Study:
Numerical Investigation Of Mixed Convective Heat Transfer Enhancement Using Rectangular Fins Using OpenFOAM
University:
Rajiv Gandhi University of Knowledge Technologies- IIIT RK Valley
Download Abstract
Download Case Study
